Plastic Automotive Parts,
Automotive Plastic Parts
1. Part Name: Interior Trim Auto Parts
2. Plastic Material: PP
3. Cavity Material: 1.2343 HRC52-54
4. Mold Life: 1 million shots or according to customer'requirement.
5. Standard Accessories: LKM, DME, HASCO, MISUMI, MEUSBURGER,according to customer’s requirements.
6. Hot Runner: Synventive,HRS, INCORE, HRS, PETS etc, and will according to customer’s requirements.
7.Software: UGNX, AutoCAD, Moldflow etc.
8. Payment: T/T, to be negotiated.
9. Packaging: Packed as customer'requirement,like vaccum package.
10. Mold Logo: Based on customer’s requirements.
11. After Sales Service: One year warranty.
|Name||Interior trim Auto parts (AInjection Mold)|
|Cayity & Core Material||1.2343 HRC52-54|
|Mold Life||1 million shots or according to customers quantity condition to make it, then will save the cost for our customer.|
|Cavity Number||2 cavities|
|Gate Type||according to the part structure and will decided customer’s requirement.|
|Cycle Time||42 Seconds|
|Standard of Mold Accessory||HASCO|
|Software||UGNX, AutoCAD, Moldflow etc.|
|Payment||T/T, to be negotiated.|
|Delivery Time(day)||38 days T1, Shipping according to customer’s requirements.|
|OEM or ODM||available|
|Mould Logo||Based on customer requirements.|
|After Sales Service||One year warranty.|
The Part Name: Interior Trim Auto Parts
Mold type: Plastic injection mold with hot runner.
Part Material: PP
Ejection Type: Ejection pins, ejection sleeves.
Mold Construction Description: Hot runner with sub gate, 2 plate mold with sliders, lifters, inserts, and shut off area.
This procut is made of PP plastic material ,The mold construction is complicated and there are many inserts, sliders, lifters and ejector pins, so it has a very high technical requirement for mold construction. The mold is a hot runner mold with the best water cooling system.
This part has very high size requirements, the defect showed below will not be acceptable, for example, weld line, dark spot , sliver marks, gas traps effect, visible ejection marks, deformation, short shot filling, burnt streaks, sink marks, flash, over dimension, under dimension, street crack etc
This mold with hot runner, the mold key advantages showed below:
1. Clamping pressure can be lower
2. Cooling time is faster
3. Cycle time is faster
4. Energy consumption lowered
5. Injection pressure can be lower
6. Injection process is cleaner
7. Injection gate are on better locations
8. Labor costs for removing the part from the mold and separating runner scrap from the part are eliminated.
9. Output increased
10. Overall profitability increased
11. Possibility of contamination is lessened with no runners
12. Possibility of producing the parts using small injection machines
13. Problems on nozzle freeze or sprue sticking are eliminated
14. Production costs are lowered
15. Production steps are shortened
16.quality of the plastic part is better
17. Regrinding is eliminated
18. Resin costs are lowered
19. Runner scrap eliminated or reduced
20. Runner weight reduces shot size